HS code lookup guide for Bangladesh importers
HS code lookup guide for Bangladesh importers
An HS code is the classification code that identifies goods in international trade. When goods are imported from China to Bangladesh, the HS code is the key that links the goods to the customs classification, and the classification is what customs uses to assess the duty and to check whether any other rule applies to the goods. A shipment without the right HS code, or with a code chosen from a guess, is a shipment where the clearance can be questioned, delayed, or reassessed.
For an importer, looking up an HS code is therefore not a clerical detail. It is the step that decides how the goods are described to customs, which documents support them, and how the duty position is confirmed. This guide explains how to look up an HS code for goods imported into Bangladesh: what the code is, how the system is organised, which information is needed before the lookup, how to search step by step, how to check the result, and which mistakes to avoid.
This guide describes how to look codes up; it does not state a code for any specific goods, because a code is only correct when it is matched to the full description of the actual goods, and that matching should be confirmed with the customs broker in writing. For help with the code for specific goods, share the full description, the specification, and the intended use with the customs broker or with China to BD | Total Import Solution, and ask for the position to be confirmed in writing before booking. Contact the helpline at +8801977954302 or email info@chinatobd.com.
What an HS Code Is
The Harmonized System, known as the HS, is the international system for classifying goods in trade. Under the system, every kind of goods has a code, and the code is built up in levels: broad groups at the top, narrower headings below them, and still narrower subheadings below those. The first part of the code identifies the broad group, and each further part narrows the description until the code points to the kind of goods being imported.
The code is used by customs in Bangladesh and in China, and by the shipping and clearing parties who handle the shipment. The same goods should carry the same code on the invoice, on the packing list, and in the customs file, because the code is the link between the description of the goods and the customs treatment. Where the code on one document differs from the code on another, customs will ask which one is correct, and the clearance will wait for the answer.
The important point for the importer is that the code follows the goods, not the other way round. The code is not chosen first and the description fitted to it; the description is written first, in full, and the code is found by matching the description to the system. A code chosen from a trade name, a brand name, or a short label is a code chosen from incomplete information, and it is the most common reason a lookup goes wrong.
What to Prepare Before the Lookup
Before looking up a code, prepare the full description of the goods in writing. Write what the goods are, what they are made of, what they are used for, how they work, and how they are presented for import. A machine, for example, should be described by what it does, how it is powered, and what it is used to make or to do; a material should be described by what it is made of and in what form it is imported; a finished product should be described by what it is, what it is made of, and who uses it and for what.
Gather the supporting papers as well: the supplier’s specification sheet, the product catalogue entry, the photos of the goods, and any standard or certificate that applies to them. Where the goods are a part of something larger, note what the larger thing is and what the part does in it. Where the goods are a set or a kit, list each item in the set, because a set is classified by its own rules, and the broker will need the full list.
Keep the description in the shipment file, and use the same description on every document. A description that changes between the invoice, the packing list, and the customs file is a description that cannot be classified with confidence, and the broker will have to ask for the correction before the code can be confirmed.
How to Look Up an HS Code, Step by Step
Look the code up in order, from the broad group to the narrow subheading, and check each step before moving to the next. The steps below follow the order the broker will use, and the importer who follows them will arrive at the same place with the same information.
- Write the full description of the goods, as described above, and keep it in front of you during the lookup.
- Identify the broad group the goods belong to, from what the goods are and what they are used for, not from the trade name.
- Read the headings inside that group, and shortlist the headings that could describe the goods.
- Read the notes that apply to the group and to each shortlisted heading, because the notes settle which heading applies where two headings seem to fit.
- Narrow the shortlist by the material, the function, and the use of the goods, setting aside the headings that do not fit.
- Within the chosen heading, read the subheadings in order, and choose the subheading that matches the goods most closely.
- Check the result against the full description: does the code describe the goods as they are, in the form in which they are imported?
- Compare the code with the codes for similar goods the importer has brought before, and note any difference, with the reason for it.
- Share the description and the code found with the customs broker, and ask the broker to confirm the code in writing, with the heading and the reason it was chosen.
- Record the confirmed code in the shipment file, and use the same code on the invoice, the packing list, and the customs file.

Checking the Code You Found
A code that has been looked up should be checked before it is used, because a code that looks right at first reading can still be wrong. The first check is the description check: read the heading and the subheading again, and ask whether they describe the goods as they are, in the form in which they are imported, and not some other form of the same goods. The second check is the notes check: read the notes for the group and the heading, and confirm that no note moves the goods to a different heading.
The third check is the consistency check: the code should agree with the codes used for the same goods on earlier shipments, unless the goods, the description, or the rules have changed. Where the code differs from an earlier shipment, the reason for the difference should be written down and confirmed with the broker. The fourth check is the document check: the code on the invoice, on the packing list, and in the customs file should all be the same, and each should match the description on that document.
Where any check fails, stop and ask the broker. Do not use a code that has failed a check, and do not change the description to fit a code. The description is the fact; the code is the finding. If the description and the code do not agree, the description should be completed or corrected, and the lookup should be done again from the corrected description.
Common Mistakes in HS Code Lookup
The mistakes importers make in HS code lookup are usually mistakes of shortcut, not of knowledge. The first is looking the code up from a trade name or a brand name, instead of from the full description of the goods. The second is copying the code from the supplier’s invoice without checking it, because the supplier’s code may have been chosen for the supplier’s own purposes, or for a different form of the goods.
A third mistake is copying the code from an earlier shipment for different goods, or for the same goods after the description or the rules have changed. A fourth is stopping at the first heading that seems to fit, without reading the notes that might move the goods to another heading. A fifth is using different codes on different documents, so that customs must ask which one is correct.
A sixth mistake is treating the lookup as a one-time task. The code should be confirmed afresh for each shipment, and the confirmation should be kept in writing, with the heading and the reason it was chosen. A seventh mistake is not keeping a record: an importer who keeps the description, the code, and the broker’s confirmation for each shipment builds a record that makes the next lookup faster and more reliable. The article End-to-end import service from China to Bangladesh describes how a full-chain service is planned from sourcing to delivery, and its guidance on one plan, one contact, and one shipment file applies to HS code lookup as well: keep the description, the code, and the confirmation together in one file.

HS Codes, Duty, and Clearance
The HS code is the link between the goods and the customs treatment, so the code shapes the clearance. Once the code is confirmed, the broker can confirm the classification and the duty position in writing, and the importer can plan the payment before the vessel arrives. Where the code is wrong, the duty position built on it is wrong as well, and the assessment will be questioned when the goods are examined.
The code also shapes the documents. The invoice, the packing list, and the customs file should all carry the same code and the same description, so that customs, the broker, and the importer are all looking at the same goods. A shipment file in which the code and the description agree is a file that can be cleared without a question about what the goods are.
Where a shipment contains more than one kind of goods, each kind should be listed separately, with its own description and its own code, and the broker should confirm each code in writing. A shipment file that mixes different goods under one description and one code cannot be classified correctly, and the assessment will be questioned. List each kind of goods on the invoice and on the packing list, with its own description, quantity, and value, and check that the lists agree. The article Import from China to Bangladesh describes the import movement as a whole, and its guidance on preparing the documents and the description before the vessel sails applies to the HS code lookup as well.
Where to Find the Classification
The classification for goods is found in the customs tariff schedule, which sets out the headings and subheadings of the system with their notes. The schedule is the authoritative source for the lookup, and the broker will use it to confirm the code. The importer who wants to understand the lookup should ask the broker which part of the schedule applies to the goods, and should read the headings and the notes for that part together with the broker.
Trade guidance and supplier information can help with the lookup, but neither replaces the schedule. The supplier knows the goods, and the supplier’s specification sheet is often the best source for the full description, but the supplier does not decide the classification. A trade association or a fellow importer may know the code used for similar goods, and that knowledge is a useful starting point, but similar goods are not the same goods, and the code should still be checked against the full description and confirmed by the broker.
Search tools that match a word to a code should be used with the same care. A word search can suggest headings, but it cannot read the notes, and it cannot tell whether the heading it suggests is the one that fits the goods as they are imported. Use the search only to shortlist headings, then read the headings and the notes in the schedule, and ask the broker to confirm the choice. The confirmation, in writing, with the heading and the reason it was chosen, is the result that matters.
Where the goods are new to the importer, allow time for the lookup. A lookup done in a hurry, from a short description, is a lookup that will have to be done again, and the second lookup will be done at the port, while the container waits. Do the lookup before the order is placed, with the full description and the specification sheet in hand, and keep the broker’s written confirmation in the shipment file before the vessel sails.
HS Codes for Mixed and Complex Goods
Some goods are harder to classify than others, and the importer should know which kinds need extra care. A set or a kit, where several items are sold together, is classified by its own rules, and the broker will need the full list of items in the set, with the description of each. A part of a larger thing is classified by what the part is and what it does, and the broker will need to know what the larger thing is and how the part fits into it.
Machinery that arrives with accessories, or goods that arrive unassembled, need the same care. The description should cover the goods as they are imported, not as they will be after assembly, and the broker should confirm the code for the goods in the form in which they arrive. Where the goods are made of more than one material, the description should say which material gives the goods their character, because the classification often turns on that question.
In every case, the rule is the same: write the full description first, match it to the system step by step, read the notes, and ask the broker to confirm the code in writing. Do not choose a code for the most valuable item in a set and apply it to the whole set, and do not choose a code for the finished product and apply it to a part. Each item, each part, and each set should be described and classified on its own facts, and the broker’s confirmation should cover each one.
Keeping an HS Code Record for the Business
An importer who brings the same kinds of goods regularly should keep an HS code record for the business, because the record makes every new shipment easier to plan. For each kind of goods, record the full description, the code confirmed by the broker, the heading and the reason it was chosen, and the date of the confirmation. Keep the specification sheet and the photos of the goods with the record, so that the next person who looks the code up can see the goods as they were described.
The record serves the whole business, not only the person who made it. A new member of staff who must prepare the documents can find the code and the description in the record, instead of starting the lookup from nothing. A new supplier can be given the description and the code, so that the supplier’s invoice carries the same code as the importer’s file. And the broker can confirm the code for a new shipment quickly, because the record shows how the code was reached before.
Review the record whenever the goods change, the supplier changes, or the rules change. A change in the specification, a new model, or a different material can change the code, even where the trade name stays the same. A change in the rules can change the code even where the goods stay the same. And a new kind of goods always needs a fresh lookup, with a fresh description and a fresh confirmation from the broker. Keep the record in one place, with the shipment files, and share it with the broker before each booking, so that the description, the code, and the confirmation are always together in one file.
Working With the Broker on the Code
The customs broker is the importer’s partner in the HS code lookup, and the working relationship should be set up before the first shipment, not at the port. The broker knows the classification system, the notes, and the practice at the port, and the importer knows the goods. The lookup works when each side brings what the other does not have.
Share the full description of the goods with the broker in writing, together with the specification sheet, the catalogue entry, and the photos. Do not share a trade name alone, and do not ask the broker to guess the goods from a short label. The broker needs the same information the importer used to buy the goods, because the classification is decided from what the goods are and what they do.
Ask the broker to confirm the code in writing, with the heading chosen and the reason it was chosen, and with the headings that were considered and set aside. The reason matters as much as the code, because the reason is what the importer will rely on if the code is questioned, and it is what the next broker will need if the broker changes. Keep the confirmation in the shipment file, with the description and the specification sheet, so that the code can be traced to the goods and the goods to the code.
Where the broker disagrees with a code the importer found, ask for the explanation in writing, and keep it in the file. Do not use a code the broker has not confirmed, and do not change the description to fit a code. Where the goods change โ a new model, a different material, a different presentation โ tell the broker before booking, and ask for a fresh confirmation in writing. A broker who is told early can confirm the code before the vessel sails; a broker who is told at the port must do the lookup while the container waits, and the waiting time is charged as storage.
HS Code Lookup Checklist
Copy this table into the shipment file and mark each item as it is completed. Complete the preparation items before the lookup, and the confirmation items before the vessel sails.
| Check | When | Done |
|---|---|---|
| Full description written: what, material, use, presentation | Before lookup | |
| Specification sheet, catalogue entry, and photos gathered | Before lookup | |
| Parts, sets, and kits listed item by item | Before lookup | |
| Broad group identified from the goods and their use | During lookup | |
| Headings shortlisted and notes read | During lookup | |
| Subheading chosen that matches the goods most closely | During lookup | |
| Code checked against the full description | After lookup | |
| Code compared with earlier shipments, differences noted | After lookup | |
| Broker confirmed the code in writing, with heading and reason | Before sailing | |
| Same code used on invoice, packing list, and customs file | Before sailing | |
| Description identical on every document | Before sailing | |
| Code, description, and confirmation kept in the shipment file | Before sailing | |
| Fresh confirmation requested if goods or rules change | Each shipment |

Frequently Asked Questions
Q1: What is an HS code?
An HS code is the classification code that identifies goods in international trade under the Harmonized System. The code is built up in levels, from broad groups to narrower headings and subheadings, and it links the goods to their customs classification.
Q2: Why does an importer need an HS code?
Because customs uses the code to classify the goods, to assess the duty, and to check whether any other rule applies. A shipment without the right code, or with a code chosen from a guess, can have its clearance questioned or delayed.
Q3: How do I look up an HS code?
Write the full description of the goods first, then work from the broad group to the narrower headings and subheadings, reading the notes at each level, and ask the customs broker to confirm the code found in writing.
Q4: What information do I need before the lookup?
The full description: what the goods are, what they are made of, what they are used for, how they work, and how they are presented for import, together with the specification sheet, the catalogue entry, and photos of the goods.
Q5: Can I use the trade name or brand name to look up the code?
No. Customs classifies goods by what they are and what they do, not by the trade name or the brand name. Look the code up from the full description, not from the name the supplier gave the goods.
Q6: Can I copy the HS code from the supplier’s invoice?
Only as a starting point, and only after checking it. The supplier’s code may have been chosen for a different form of the goods, so check it against the full description and ask the broker to confirm it in writing.
Q7: Can I use the same HS code as an earlier shipment?
Only if the goods, the description, and the rules are the same. Different goods have different codes, and the rules change, so confirm the code afresh for each shipment and note any difference with the reason for it.
Q8: What should I do if two headings seem to fit my goods?
Read the notes for the group and for each heading, because the notes settle which heading applies where two headings seem to fit. If the notes do not settle it, ask the broker to confirm the choice in writing with the reason.
Q9: Should the HS code be the same on every document?
Yes. The code on the invoice, on the packing list, and in the customs file should all be the same, and each should match the description on that document.
Q10: What if my shipment contains more than one kind of goods?
List each kind separately, with its own description and its own code, and ask the broker to confirm each code in writing. Do not mix different goods under one description and one code.
Q11: How do I check a code I have looked up?
Check it against the full description, read the notes for the group and the heading, compare it with the codes for the same goods on earlier shipments, and confirm that the code is the same on every document.
Q12: What is the link between the HS code and the duty rate?
The code links the goods to the classification, and the classification is what customs uses to assess the duty. A wrong code means the duty position built on it is wrong as well.
Q13: How often should the HS code be confirmed?
For each shipment, afresh. Keep the description, the code, and the broker’s written confirmation in the shipment file, and ask for a fresh confirmation if the goods, the description, or the rules change.
Q14: What should I do if the broker disagrees with the code I found?
Ask the broker to explain the choice in writing, with the heading and the reason it was chosen, and keep the explanation in the shipment file. Do not use a code the broker has not confirmed.
Q15: What records should I keep for HS code lookup?
Keep the full description, the specification sheet, the code found, the broker’s written confirmation with the heading and the reason, and the documents that carry the code, all in one shipment file.
Q16: How can China to BD | Total Import Solution help with HS code lookup for Bangladesh importers?
China to BD | Total Import Solution has supported importers from China to Bangladesh since 2016, with sourcing, shipping, customs handling, warehousing, and delivery. The team can work with the customs broker to look up and confirm the code for specific goods in writing before booking, and keep the description, the code, and the confirmation together in one shipment file.
Contact China to BD | Total Import Solution
For a written plan and quotation for a shipment from China to Bangladesh, contact China to BD | Total Import Solution. Share the full description, the specification, and the intended use of the goods, so the code and the duty position can be confirmed for the actual shipment.
- Brand: China to BD | Total Import Solution
- Company: Total Import Solution, since 2016
- Helpline: +8801977954302
- Email: info@chinatobd.com
- Website: www.chinatobd.com
- Warehouse & Office: House 38A, Mendi Dental College Road, Road 11, Dhanmondi Riverview Model Town, Dhaka 1209
Call the helpline at +8801977954302 or email info@chinatobd.com to discuss HS code lookup for Bangladesh importers, to confirm a code with the broker, or to check a document list before the vessel sails.
