Port charges at Chittagong: what importers should know
Port charges at Chittagong: what importers should know
A container that arrives at Chittagong port does not simply leave the port on its own. Between the vessel berthing and the container leaving the gate, a series of port services take place: the vessel is berthed, the container is lifted off, it is moved to a yard, it is stored while customs work goes on, it may be opened for examination, and it is finally loaded onto a truck. Each of those services is a port charge, and the importer is the party who ultimately pays for them, whether the charge appears on the shipping line bill, on a terminal bill, or on the clearing and forwarding bill.
For an importer bringing goods from China to Bangladesh, port charges are one of the parts of the landed cost that is most often misunderstood. Ocean freight is quoted before the vessel sails, and the duty position can be checked with the customs broker before booking, but port charges depend on what happens after the vessel arrives: how long the container stays, whether it is examined, how it is handled, and how quickly it is collected. An importer who understands the charges before the vessel arrives can plan the money, the documents, and the transport in the right order, and can avoid the extra charges that come from delay.
This article explains port charges at Chittagong in plain terms: what the charges cover, which groups of charges apply to a container, how the charges are worked out, who raises each charge, which steps to take before the vessel arrives, why charges sometimes grow after arrival, and which records to keep. No figure in this article is presented as a charge or a rate, because the amount depends on the container, the cargo, the handling, and the time the container spends at the port. For a figure for a specific shipment, share the cargo list, the container details, and the arrival plan with China to BD | Total Import Solution and ask for a written quotation. Contact the helpline at +8801977954302 or email info@chinatobd.com.
What Port Charges Cover at Chittagong
Port charges are the charges for the services the port and the terminal provide to a vessel and to a container. When a vessel arrives at Chittagong, the port provides the berth, the channel, and the pilotage that bring the vessel alongside. When the container is discharged, the terminal provides the cranes, the yard equipment, and the labour that lift the container off the vessel and place it in the yard. While the container waits for customs clearance, the terminal provides the yard space where it stands. When the container is collected, the terminal provides the handling that loads it onto the truck and the gate service that releases it.
These services are separate from the ocean freight, which is the charge for moving the container by sea from the port in China to the port in Bangladesh, and separate from the customs duty and tax, which are set by the customs rules for the exact goods. An importer who reads a quotation should be able to see which part is freight, which part is port handling, and which part is duty and tax, because each part is raised by a different party and each part is paid at a different stage.
The practical point is simple: the port charges for a container are not a single line. They are a set of lines, each one tied to a service, and the number of lines grows when the container needs more services. A container that is cleared and collected promptly needs fewer services than a container that waits in the yard, is moved more than once, or is opened for a detailed examination. Planning the clearance and the transport before the vessel arrives is therefore not only a matter of timing; it is also a matter of keeping the number of chargeable services as small as the shipment allows.
The Main Groups of Port Charges
The charges that apply to a container at Chittagong fall into a small number of groups, and it helps to know the groups before reading any bill. Vessel-related charges cover the services provided to the vessel itself, such as berthing and pilotage. Handling charges cover the lifting and moving of the container: discharge from the vessel, movement to the yard, and loading onto the truck at the gate. Storage charges cover the time the container stands in the yard while customs clearance and documentation are completed.
Examination charges cover the handling that takes place when customs requires the container to be opened and the goods to be checked. Documentation charges cover the paperwork the terminal and the port issue for the container, such as the delivery order and the gate pass. Other charges can arise when a container needs special handling, such as a container that must be kept under cover, a container that must be shifted within the yard, or a container whose seal or documentation must be corrected before release.

| Charge group | What it covers | Who usually raises it |
|---|---|---|
| Vessel services | Berth, pilotage, and channel services for the vessel | Port authority through the shipping line |
| Container handling | Lifting the container off the vessel and moving it to the yard | Terminal operator |
| Yard storage | Space occupied by the container while clearance is completed | Terminal operator |
| Examination handling | Moving, opening, and re-sealing a container for customs examination | Terminal operator with customs |
| Documentation | Delivery order, gate pass, and related terminal paperwork | Terminal operator or shipping line |
| Gate and delivery | Loading the container onto the truck and releasing it at the gate | Terminal operator |
| Special handling | Shifting, covering, or extra handling for particular cargo | Terminal operator |
How Port Charges Are Worked Out
Port charges are worked out from the facts of the shipment, not from a single flat amount. The size and type of the container matter, because a larger container and a special container need different handling and different yard space. The weight of the container matters, because the lifting equipment and the yard plan are arranged around it. The length of stay matters, because storage is charged for the time the container occupies yard space. The number of handling moves matters, because each lift and each shift is a service.
The nature of the cargo matters as well. Goods that need examination, goods that need to be kept under cover, and goods that need special equipment all need extra services, and each extra service is a charge. The documents matter too: a container whose documents are complete and agreed before arrival can be cleared and collected without delay, while a container whose documents need correction waits in the yard, and the waiting time is charged as storage.
Because the charges depend on these facts, two containers on the same vessel can have different port charges. One may be a standard container with complete documents, collected promptly, while the other may be a container that needs examination, waits for a corrected document, and is moved more than once in the yard. An importer should therefore never compare port charges between shipments without comparing the facts behind them: the container, the cargo, the documents, and the time the container spent at the port.
Port Charges, the Shipping Line, and the Terminal
Three parties are involved in port charges, and each one raises a different part of the bill. The port authority provides the port itself: the channel, the berths, and the navigation services. The shipping line carries the container by sea and is the party the importer usually deals with for the freight and for the release of the container. The terminal operator runs the yard where the container is discharged, stored, and loaded onto the truck.
In practice, the importer often sees the port charges on a single bill from the shipping line or from the clearing and forwarding agent, rather than as separate bills from each party. The bill should still show the charges line by line, so that the importer can see which charge is for handling, which is for storage, and which is for documentation. A bill that shows only one total, with no lines, cannot be checked, and an importer who cannot check a bill cannot tell whether a charge relates to a service the container actually received.
Ask for the bill in writing, with each charge shown on its own line, and keep it with the shipment file. Ask also which charges are included in the quotation given before booking and which are separate, because a quotation that covers freight only does not cover port handling, and a quotation that covers port handling for a prompt collection does not cover storage for a container that waits. The article Zero Demurrage Shipping: Rent Containers for Extended Offloading explains how container rental can be planned when a load cannot be received in one visit, and its guidance on agreeing the rental period, the delivery point, and the return plan before the vessel sails applies to any shipment where the container may need to wait before collection.
Steps to Take Before the Vessel Arrives
The steps below should be completed before the vessel reaches Chittagong. A container whose documents, customs plan, and transport are ready before arrival can be cleared and collected without delay, and a container collected without delay needs fewer chargeable services.
- Confirm the cargo list with the supplier in China, and check that the invoice, the packing list, and the bill of lading agree with each other.
- Name the customs broker who will handle the clearance, and share the full document set with the broker before the vessel sails.
- Confirm the duty position with the customs broker, so that the duty and tax payment is planned before arrival rather than arranged after it.
- Ask the shipping line or the agent for the expected arrival and the terminal where the container will be discharged.
- Ask for the port charges in writing, line by line, and ask which charges are included in the quotation and which are separate.
- Confirm the transport from the port: the truck, the driver, the route, and the date and time the truck will be at the gate.
- Confirm the warehouse or delivery point in Dhaka, and check that the site can receive the container on the planned date.
- Check the container and seal numbers with the supplier, and record them in the shipment file.
- Prepare the payment for the port charges, the duty, and the transport, so that no payment delay holds the container at the port.
- Share the full plan in writing with every party: the supplier, the shipping line, the customs broker, the transporter, and the warehouse contact.

Why Port Charges Sometimes Grow After Arrival
Port charges grow after arrival for a small number of reasons, and most of them can be prevented by the steps above. The most common reason is delay: the container waits in the yard while a document is corrected, while a payment is arranged, or while the transport is booked, and the waiting time is charged as storage. A second reason is examination: when customs requires the container to be opened, the handling for the examination is charged, and the container may need to be moved and re-sealed as well.
A third reason is extra handling: a container that must be shifted within the yard, a container that must be moved to a covered area, or a container that must be handled more than once because the truck arrived late or the delivery point was not ready. A fourth reason is a documentation error: a consignee name spelled differently on two documents, a port of discharge that does not match the booking, or a container number recorded incorrectly. Each of these errors must be corrected before the container is released, and the correction takes time, during which the container stays in the yard.
The pattern is worth noting: the charges that grow after arrival are usually the charges for time and for extra handling, not the charges for the basic discharge. The basic handling is the same for every container of the same size, but the storage and the extra handling depend on what happens after the vessel arrives. An importer who keeps the documents ready, the payment ready, and the transport ready has already removed the most common reasons for growth.
Records, Receipts, and the Shipment File
Every port charge should be recorded in the shipment file, with the bill, the receipt, and the service it relates to. Keep the quotation given before booking, the bill raised after arrival, and the receipt for each payment, and check the bill against the quotation line by line. If a line on the bill does not match the quotation, ask the party who raised it to explain the line in writing before paying it.
The shipment file should also hold the documents that support the charges: the bill of lading, the delivery order, the gate pass, the examination note where an examination took place, and the transport receipt. Together these papers show which services the container received, when it received them, and when it left the port. If a question arises later โ about a charge, about a delay, or about the condition of the goods โ the file is the record that answers it.
Where the shipment is part of a regular import programme, the file also becomes the basis for planning the next shipment. An importer who can see, shipment by shipment, which charges were for handling, which were for storage, and which were for examination can see where the time was spent and where the plan should change. The article China to Bangladesh freight cost per CBM describes how freight cost is considered per unit of cargo, and its guidance on comparing the cost factors for a shipment applies to port charges as well: compare the facts behind the figures, not the figures alone.
Planning Port Charges Into the Landed Cost
The landed cost of imported goods is the full cost of bringing the goods from the supplier in China to the delivery point in Bangladesh, and port charges are one part of it. The other parts are the cost of the goods themselves, the ocean freight, the customs duty and tax, the clearing and forwarding service charge, the transport from the port, and the warehouse and delivery costs. An importer who plans only the cost of the goods and the freight, and leaves the port charges out of the plan, will find the money short when the container arrives.
Planning the port charges starts with the quotation. Ask the shipping line or the agent for the port charges in writing, line by line, before booking, and ask which charges are included and which are separate. Then ask what would change the charges: a longer stay in the yard, an examination, an extra handling move, or a change in the delivery plan. The answers to those questions are the basis for the plan, because they show which charges are fixed for the shipment and which depend on what happens after arrival.
Keep a record of the port charges for each shipment, with the quotation, the bill, and the receipts, and compare the record shipment by shipment. Over time the record shows the pattern: which shipments needed only the basic handling, which needed examination, and which waited in the yard. The pattern is the guide for the next shipment, because it shows where the time was spent and where the plan should change. An importer who can see that the last three shipments all waited for the same document, for example, can fix the document before the next vessel sails.
The landed cost should also be planned in the right order. Confirm the cargo list and the documents first, then the duty position, then the transport, and then the port charges. Each step depends on the one before it: the documents decide the clearance, the clearance decides the timing, and the timing decides the storage. A plan made in the wrong order โ transport booked before the documents are ready, or payment arranged after the vessel arrives โ is a plan that will be remade at the port, at a cost.
Finally, share the plan with every party. The supplier, the shipping line, the customs broker, the transporter, and the warehouse contact should all hold the same written plan, with the same dates, the same container details, and the same delivery point. A plan held by one party only is a plan that no one else can follow, and a shipment that no one else can follow is a shipment that waits.
Working With the Terminal and the Shipping Line
The terminal and the shipping line are the two parties the importer deals with most directly at the port, and the working relationship with each should be set up before the vessel arrives. The shipping line is the party that carries the container and issues the bill of lading, and it is the party that releases the container for collection once the freight and the line’s charges are settled. The terminal is the party that discharges the container, stores it in the yard, and loads it onto the truck at the gate.
The first document in the relationship is the delivery order, which the shipping line issues when the container is ready for collection. The importer or the agent should ask when the delivery order will be issued, what is needed for it, and whether any payment must be settled first. The second document is the gate pass, which the terminal issues for the truck to enter and leave. The driver should hold the gate pass, the container number, and the seal number before setting out, so that the collection is not delayed at the gate.
Communication should be named, not general. Ask the shipping line for the name and phone number of the person handling the container, and ask the terminal for the same. Share those names with the transporter and the warehouse contact, so that a question at the gate can be answered by the person who holds the file, rather than by a general helpline. Where the container needs examination, ask who will attend, when the examination will take place, and what will happen to the container afterwards, so that the examination is part of the plan rather than a surprise.
Where a problem arises โ a document that does not match, a seal number that differs, or a truck that cannot reach the gate on the planned day โ tell the shipping line and the terminal as soon as the problem is known, in writing, and agree the new plan in writing as well. A problem reported early can be solved while the container is still in the yard; a problem reported late must be solved after the container has waited, and the waiting time is charged. Keep every message, every agreed change, and every receipt in the shipment file, so that the record of the shipment is complete from the vessel’s arrival to the container’s departure from the gate.
Port Charges Checklist for Importers
Copy this table into the shipment file and mark each item as it is completed. Complete the pre-arrival items before the vessel reaches Chittagong, and the collection items before the truck leaves the gate.
| Check | When | Done |
|---|---|---|
| Cargo list confirmed with supplier, documents agree | Before sailing | |
| Customs broker named, full document set shared | Before sailing | |
| Duty position confirmed with the broker | Before arrival | |
| Expected arrival and discharge terminal confirmed | Before arrival | |
| Port charges requested in writing, line by line | Before arrival | |
| Quotation checked: which charges included, which separate | Before arrival | |
| Transport booked, with driver, route, date, and time | Before arrival | |
| Warehouse or delivery point confirmed ready | Before arrival | |
| Container and seal numbers recorded | Before arrival | |
| Payment for port charges, duty, and transport prepared | Before arrival | |
| Bill checked against quotation, line by line | At arrival | |
| Examination note kept, where examination took place | At arrival | |
| Delivery order and gate pass kept in the file | At collection | |
| Container loaded, seal checked before the truck leaves | At collection | |
| Receipts for all port charges kept in the shipment file | After collection |

Frequently Asked Questions
Q1: What are port charges at Chittagong?
Port charges are the charges for the services the port and the terminal provide to a vessel and to a container: berthing, discharge, yard handling, storage, examination handling, documentation, and gate release.
Q2: Are port charges the same as ocean freight?
No. Ocean freight is the charge for moving the container by sea from China to Bangladesh. Port charges are the charges for the services at the port in Bangladesh after the vessel arrives.
Q3: Are port charges the same as customs duty?
No. Customs duty and tax are set by the customs rules for the exact goods. Port charges are the charges for the port and terminal services the container receives.
Q4: Which charges usually apply to a container at Chittagong?
The usual groups are vessel services, container handling, yard storage, examination handling, documentation, and gate and delivery. Special handling can add further lines for particular cargo.
Q5: How are port charges worked out?
They are worked out from the facts of the shipment: the container size and type, the weight, the length of stay in the yard, the number of handling moves, the nature of the cargo, and the state of the documents.
Q6: Who raises the port charges?
The port authority provides the port, the terminal operator runs the yard, and the shipping line carries the container. In practice the importer often sees the charges on one bill from the shipping line or from the clearing and forwarding agent.
Q7: Why do port charges grow after the vessel arrives?
They usually grow because of delay, examination, extra handling, or a documentation error. Each of these keeps the container in the yard longer or needs extra services, and the extra time and handling are charged.
Q8: What is yard storage, and when does it apply?
Yard storage is the charge for the space the container occupies in the terminal yard while customs clearance and documentation are completed. It applies for the time the container stands in the yard.
Q9: What happens when customs examines a container at Chittagong?
The container is moved, opened, and checked, and then re-sealed. The handling for the examination is charged, and the examination note should be kept in the shipment file.
Q10: How can I check a port charge bill?
Ask for the bill in writing with each charge on its own line, and check it against the quotation given before booking. Ask the party who raised any line that does not match to explain it in writing before paying it.
Q11: Which documents should I have ready before the vessel arrives?
The commercial invoice, the packing list, the bill of lading, and the certificate of origin where required, together with the import registration and tax papers. Confirm with the customs broker which papers must be presented in original and which as a copy.
Q12: Does the container size affect the port charges?
Yes. The size and type of the container affect the handling and the yard space it needs, so the charges are worked out from the container as well as from the cargo and the time it spends at the port.
Q13: What should I do if the truck is late to the port?
Tell the terminal and the transporter as soon as the delay is known, and agree a new collection time in writing. A late truck can mean extra handling or a longer stay in the yard, so the change should be recorded in the shipment file.
Q14: Can port charges be reduced?
Port charges follow the services the container receives, so the practical way to keep them down is to reduce the services needed: complete documents, a confirmed customs plan, payment ready, and transport booked before the vessel arrives, so the container is cleared and collected without delay.
Q15: What records should I keep for port charges?
Keep the quotation, the bill, the receipts, the bill of lading, the delivery order, the gate pass, and any examination note, all in one shipment file, so that each charge can be traced to a service and a date.
Q16: How can China to BD | Total Import Solution help with port charges at Chittagong?
China to BD | Total Import Solution has supported importers from China to Bangladesh since 2016, with sourcing, shipping, customs handling, warehousing, and delivery. The team can explain the port charges for a specific shipment, plan the clearance and the transport before the vessel arrives, and keep the documents and receipts in one shipment file.
Contact China to BD | Total Import Solution
For a written plan and quotation for a shipment through Chittagong port, contact China to BD | Total Import Solution. Share the cargo list, the container details, the loading point in China, and the delivery point in Bangladesh, so the plan can be based on the actual shipment.
- Brand: China to BD | Total Import Solution
- Company: Total Import Solution, since 2016
- Helpline: +8801977954302
- Email: info@chinatobd.com
- Website: www.chinatobd.com
- Warehouse & Office: House 38A, Mendi Dental College Road, Road 11, Dhanmondi Riverview Model Town, Dhaka 1209
Call the helpline at +8801977954302 or email info@chinatobd.com to discuss port charges at Chittagong, to confirm a plan for clearance and collection, or to check a document list before the vessel sails.
